Resumen
Los sistemas de cocción para derivados cárnicos cocidos deben proporcionar una eficiente y homogénea transferencia térmica, de tal manera que se garantice la calidad y la seguridad microbiológica del producto final. En este estudio se evaluó y comparó el efecto de dos sistemas de cocción sobre la eficiencia de transferencia de calor y la letalidad del proceso durante la cocción de jamones tipo York. Para ello, se cocinaron jamones tipo York en un módulo de cocción con agua y un horno a vapor, a una temperatura de 80 °C hasta alcanzar una temperatura interna de 72 °C. Las variables medidas fueron el tiempo de cocción, la velocidad de cocción, el coeficiente convectivo de trasferencia de calor, el valor pasteurizador (P0) y la letalidad acumulada del proceso equivalente, estas dos últimas tomando como referencia Listeria monocytogenes y Salmonella spp. Los resultados mostraron que el tiempo de calentamiento disminuyó significativamente (p < 0,05) durante la cocción en el módulo, mientras que la velocidad de calentamiento y el coeficiente convectivo fueron significativamente mayores (p < 0,05) en este mismo sistema. Para el P0, no se encontraron diferencias significativas (p > 0,05) entre tratamientos, destacándose que este fue mayor al criterio de letalidad definido para ambos microorganismos y se alcanzó antes de llegar a los 72 °C en los jamones. Estos resultados permitieron concluir que la cocción en agua ofrece una transferencia de calor más eficiente y homogénea, así como una seguridad microbiológica en el producto final.
Aguilar, C., Valencia, V., Ochoa, O., & Klotz, B. (2013). Improving food termal processing: a death-time study on processed meat products. Journal of Food Processing and Preservation, 37(3), 189-197. https://doi.org/10.1111/j.1745-4549.2011.00627.x
Amézquita, A. (2018). Microbiología de la carne, aves y pescado. En Instituto de Ciencia y Tecnología Alimentaria (Ed.). La carne: ciencia, tecnología y salud (pp. 376-399). Colombia: Editores Publicidad S.A.S.
Becker, A., Boulaaba, A., Pingen, S., Röhner, A., & Klein, G. (2015). Low temperature, long time treatment of porcine M. longissimus thoracis et lumborum in a combi steamer under commercial conditions. Meat Science, 110, 230-235. https://doi.org/10.1016/j.meatsci.2015.07.024
Casp, A., & Abril, J. (2003). Procesos de conservación de alimentos. Madrid, España: Ediciones Mundi-Prensa.
Cengel, Y., & Ghajar, A. (2020). Transferencia de calor y masa 6ta ed. McGraw-Hill Interamericana.
Cheng, Q., Sun, D. W., & Scannell, A. (2005). Feasibility of water cooking for pork ham processing as compared with traditional dry and wet air cooking methods. Journal of Food Engineering, 67(4), 427-433. https://doi.org/10.1016/j.jfoodeng.2004.05.011
Contreras, M., Benedito, J., Bon, J., & García-Pérez, J. V. (2018). Intensification of heat transfer during mild thermal treatment of dry-cured ham by using airborne ultrasound. Ultrasonics Sonochemistry, 41, 206-212. https://doi.org/10.1016/j.ultsonch.2017.09.019
Ducic, M., Klisara, N., Markov, S., Blagojevic, B., Vidakovic, A., & Buncic, S. (2016). The fate and pasteurization-based inactivation of Escherichia coli O157, Salmonella Typhimurium and Listeria monocytogenes in dry, fermented sausages. Food Control, 59, 400-406. https://doi.org/10.1016/j.foodcont.2015.06.014
Freier, T. A. (2001). Use of the AMI process lethality spreadsheet to salidate the safety of cooking procedures. 54th Reciprocal Meat Conference. https://meatscience.org/docs/default-source/publications-resources/rmc/2001/use-of-the-ami-process-lethality-spreadsheet-to-validate-the-safety-of-cooking-procedures.pdf?sfvrsn=2
González, M., Suárez, H., & Martínez, O. (2010). Influencia del proceso de cocción y temperatura de almacenamiento sobre las características fisicoquímicas, microbiológicas y sensoriales del jamón de cerdo. Revista Colombiana de Ciencias Pecuarias, 23(3), 336-348. http://www.scielo.org.co/scielo.php?script=sci_arttext&pid=S0120-06902010000300009
Isleroglu, H., & Kaymak-Ertekin, F. (2016). Modelling of heat and mass transfer during cooking in steam-assisted hybrid oven. Journal of Food Engineering, 181, 50-58. https://doi.org/10.1016/j.jfoodeng.2016.02.027
Karyotis, D., Skandamis, P. N., & Juneja, V. K. (2017). Thermal inactivation of Listeria monocytogenes and Salmonella spp. in sous-vide processed marinated chicken breast. Food Research International, 100, 894-898. https://doi.org/10.1016/j.foodres.2017.07.078
Kreith, F., Manglik, R., & Bohn, M. (2012). Principios de transferencia de calor. México, D. F.: Cengage Learning Editores.
Lagares, J. (2011). Proceso de fabricación de productos cárnicos cocidos de músculo entero V: Cocción. Metalquimia Artículos Tecnológicos, 2, 159-169. https://www.metalquimia.com/download/docs/55324/proceso-de-fabricacion-de-productos-carnicos-cocidos-de-musculo-entero-ii.pdf
McMinn, R., King, A., Milkowski, A., Hanson, R., Glass, K., & Sindelar, J. (2018). Processed Meat Thermal Processing Food Safety - Generating D-Values for Salmonella, Listeria monocytogenes, and Escherichia coli. Meat and Muscle Biology, 2(1), 168-179. https://doi.org/10.22175/mmb2017.11.0057
Mora, B., Curti, E., Vittadini, E., & Barbanti, D. (2011). Effect of different air/steam convection cooking methods on turkey breast meat: physical characterization, water status and sensory properties. Meat Science, 88(3), 489-497. https://doi.org/10.1016/j.meatsci.2011.01.033
Moreno, L. (2017, diciembre 7). Cómo elaborar jamón ahumado: técnicas, servicios y equipos. Carnetec. https://www.carnetec.com/Industry/News/Details/76884
Murphy, R., Duncan, L., Johnson, E., & Davis, M. (2001a). Process Lethality and Product Yield for Chicken Patties Processed in a Pilot-Scale Air-Steam Impingement Oven. Journal of Protection, 64(10), 1549-1555. https://doi.org/10.4315/0362-028X-64.10.1549
Murphy, R., Johnson, E., Duncan, L., Clausen, E., Davis, M., & March, J. (2001b). Heat Transfer Properties, Moisture Loss, Product Yield, and Soluble Proteins in Chicken Breast Patties During Air Convection Cooking. Poultry Science, 80, 508-514. https://doi.org/10.1093/ps/80.4.508
Murphy, R., Johnson, E., Duncan, L., Davis, M., Johnson, M., & Marcy, J. (2001c). Thermal Inactivation of Salmonella spp. and Listeria innocua in the Chicken Breast Patties Processed in a Pilot-Scale Air-Convection Oven. Journal of Food Science, 66(5), 734-741. https://doi.org/10.1111/j.1365-2621.2001.tb04630.x
Ochoa, O., & Giraldo, A. (2018). Procesos térmicos en la industria cárnica. En Instituto de Ciencia y Tecnología Alimentaria (Ed.). La carne: ciencia, tecnología y salud (pp. 242-293). Colombia: Editores Publicidad S.A.S.
Osaili, T. M., Hasan, F., Dhanasekaran, D. K., Obaid, R. S., Al-Nabulsi, A. A., Rao, S., Fatima, H., Ayyash, M., Savvaidis, I., & Holley, R. (2020). Thermal inactivation of Escherichia coli O157: H7 strains and Salmonella spp. in camel meat burgers. LWT-Food Science and Technology, 120, 108914. https://doi.org/10.1016/j.lwt.2019.108914
Pan, Z., & Singh, R. P. (2002). Heating Surface Temperature and Contact-Heat Transfer Coefficient of A Clam-Shell Grill. LWT - Food Science and Technology, 35(4), 348-354. https://doi:10.1006/fstl.2001.0881
Prapasuwannakul, N., & Panbualuang, M. (2017). Evaluation of thermal processes for reduction of Salmonella spp. and Escherichia coli in pork sausage wrapped in banana leaves. Conference of the International Journal of Arts & Sciences, 10(2), 93-98. http://universitypublications.net/proceedings/1002/pdf/K7D565.pdf
Pathare, P. B., & Roskilly, A. P. (2016). Quality and energy evaluation in meat cooking. Food Engineering Reviews, 8(4), 435-447. https://doi.org/10.1007/s12393-016-9143-5
Raseta, M., Jovanovic, J., Becskei, Z., Lazic, I. B., Mrdovic, B., & Djordjevic, V. (2021). Optimization of pasteurization of meat products using pasteurization values (p-values). IOP Conference Series: Earth and Environmental Science, 854(1), 012079. https://doi:10.1088/1755-1315/854/1/012079
Sindelar, J., Glass, K., Hanson, R., Sebranek, J. G., Cordray, J., & Dickson, J. S. (2019). Validation of lethality processes for products with slow come up time: Bacon and bone-in ham. Food Control, 104, 147-151. https://doi.org/10.1016/j.foodcont.2019.04.020
Singh, R. P., & Heldman, D. R. (2013). Introduction to food engineering. Países Bajos: Elsevier.
Tiwari, B. K., & O’Donnell, C. (2012). Thermal processing of meat and meat products. En D. W. Sun (Ed.). Thermal Food Processing: New Technologies and Quality Issues (pp. 195-220). Reino Unido: Taylor & Francis Group.
USDA-FSIS (U.S. Dept. of Agriculture - Food Safety and Inspection Service). (1999). Performance standards for the production of certain meat and poultry products. Federal Register, 64(3), 732-749. https://www.federalregister.gov/documents/1999/01/06/99-32/performance-standards-for-the-production-of-certain-meat-and-poultry-products
Wichchukit, S., Zorrilla, S., & Singh, R. P. (2001). Contact heat transfer coefficient during double-sided cooking of hamburger patties. Journal of Food Processing Preservation, 25(3), 207-221. https://doi.org/10.1111/j.1745-4549.2001.tb00455.x